Engineering NiO/PEDOT: PSS Hybrid Electrode for Enhanced Charge-Storage Kinetics, Energy Density, and Long-Term Cycling Stability

Authors

  • Syed Shehzad Hassan Institute of Physics (IOP), Government College (GC) Lahore
  • Muhammad Imran (Department of Electronics), Government College (GC) Lahore
  • Asaad Alluhaybi Department of Physical Sciences, College of science, University of Jeddah, jeddah, 23890, Saudi Arabia
  • Muhammad Imran Bashir University of Lahore (UOL)
  • Muhammad Javed Akhtar Institute of Physics (IOP), Government College (GC) Lahore
  • Muhammad Ahmad Rohaan LACAS, Burki

Keywords:

Nickel Oxide, PEDOT, Conducting Polymer, Supercapacitors, Pseudocapacitance, Energy Storage, Cycling Stability

Abstract

Abstract

The development of efficient electrode materials with excellent redox reversibility and long-term cycling stability remains a major research challenge in electrochemical energy storage. In this study, for the first time, a conducting polymer-assisted NiO composite was developed by incorporating poly(3,4-ethylenedioxythiophene) (styrenesulfonate) (PEDOT) into hydrothermally synthesized NiO nanoparticles through a facile physical mixing approach. 1.5 mL PEDOT was used with nickel oxide (NiO) to evaluate the influence on the electrochemical behavior of NiO-based electrodes. The integrity of the crystalline NiO structure and the effective inclusion of the conducting polymer were verified by structural and morphological analyses performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR). A three-electrode setup with a multichannel workstation with a 3 M KOH electrolyte was used for the electrochemical experiments. The specific capacitance of the NiO-PEDOT composite was recorded as 413 F g⁻¹, which is higher than that of pristine NiO (243 F g⁻¹) at 1 A g⁻¹. In addition, the oxidation b-value increased from 0.51 to 0.78 according to kinetic analysis, suggesting that surface-controlled charge-storage processes and redox chemistry played a more prominent role. In comparison to pure NiO, which loses 8.9% of its initial capacitance after 5000 redox cycles, the composite shows outstanding cycling stability, maintaining 98.7% after 5000 cycles. Moreover, compared to pure NiO, representing the densities of 4.134 Wh kg⁻¹ and 212 W kg⁻¹ and coulomb efficiency of 89%, respectively, the NiO-PEDOT electrode showed densities of 14.34 Wh kg⁻¹ and 511 W kg⁻¹ and coulomb efficiency of 93%. The conductive polymer network promoted interparticle connections, resulting in improved electron transport, and preserving electrochemical activity throughout the cycling stability evaluation. This study establishes the foundation for integrating PEDOT into NiO-based materials to augment structural constancy, redox reversibility, and efficiency, paving a new research corridor for PEDOT integration into metal oxides.

References

A. G. Olabi, Q. Abbas, A. Al Makky, and M. A. Abdelkareem, “Supercapacitors as next generation energy storage devices: Properties and applications,” Energy, vol. 248, p. 123617, Jun. 2022, doi: 10.1016/J.ENERGY.2022.123617.

F. Wang et al., “Latest advances in supercapacitors: from new electrode materials to novel device designs,” Chem. Soc. Rev., vol. 46, no. 22, pp. 6816–6854, Nov. 2017, doi: 10.1039/C7CS00205J.

S. S. Hassan et al., “Tailoring NiO nanostructures via solvent engineering: structural, optical and supercapacitor performance insights,” Ionics 2026 325, vol. 32, no. 5, pp. 5709–5724, Apr. 2026, doi: 10.1007/S11581-026-07109-7.

M. Ben Arbia and E. Comini, “Growth Processing and Strategies: A Way to Improve the Gas Sensing Performance of Nickel Oxide-Based Devices,” Chemosens. 2024, Vol. 12, Page 45, vol. 12, no. 3, p. 45, Mar. 2024, doi: 10.3390/CHEMOSENSORS12030045.

R, Arun S; Jacob, George, “Exploring the charge storage ability of the spinel-type high entropy oxide (MnFeCoNiZn)3O4 nanoparticles for supercapacitor applications,” CEJA, 2025, [Online]. Available: https://ui.adsabs.harvard.edu/abs/2025CEJA...2100708R/abstract

M. B. Kumbhar, V. V. Patil, V. S. Chandak, J. L. Gunjakar, and P. M. Kulal, “Enhancing energy storage with binder-free nickel oxide cathodes in flexible hybrid asymmetric solid-state supercapacitors,” J. Alloys Compd., vol. 1010, p. 177311, Jan. 2025, doi: 10.1016/J.JALLCOM.2024.177311.

W. Lu, Y. Li, M. Yang, X. Jiang, Y. Zhang, and Y. Xing, “Construction of Hierarchical Mn2O3@MnO2Core-Shell Nanofibers for Enhanced Performance Supercapacitor Electrodes,” ACS Appl. Energy Mater., vol. 3, no. 9, pp. 8190–8197, Sep. 2020, doi: 10.1021/ACSAEM.0C00392.

D. S. Sawant, S. B. Kulkarni, D. P. Dubal, and G. M. Lohar, “Transition Metal Molybdates Emerging Materials for High-Performance Supercapacitors: A Machine Learning Analysis,” Batter. Energy, vol. 4, no. 3, May 2025, doi: 10.1002/BTE2.20240073.

R. Govindaraju, A. Balakrishnan, N. M. Chidambaram, V. Thirumal, P. Rajkumar, and J. Kim, “Integrated Effects of NiCo2O4 and Reduced Graphene Oxide in High-Performance Supercapacitor Systems,” Inorganics, vol. 14, no. 2, p. 33, Feb. 2026, doi: 10.3390/INORGANICS14020033/S1.

S. S. Hassan et al., “Synergistic biphasic Cr₂O₃–ZrO₂/MWCNT nanocomposite: exceptional electrochemical performance for next-generation supercapacitors,” Ionics 2026, pp. 1–23, Oct. 2026, doi: 10.1007/S11581-026-07594-W.

K. Hyun, J. H. Lee, and S. J. Kim, “Incorporation Of Multi-Walled Carbon Nanotubes Into Oxide Layer Formed On Al Alloy By Plasma Electrolytic Oxidation,” Surf. Rev. Lett., vol. 27, no. 11, pp. 1–7, Nov. 2020, doi: 10.1142/S0218625X20500079.

S. A. Thomas, J. Cherusseri, and D. N. Rajendran, “Hierarchical Two-Dimensional Layered Nickel Disulfide (NiS2)@PEDOT:PSS Nanocomposites as Battery-Type Electrodes for Battery-Type Supercapacitors with High Energy Density,” Electrochem 2024, Vol. 5, Pages 298-313, vol. 5, no. 3, pp. 298–313, Jul. 2024, doi: 10.3390/ELECTROCHEM5030019.

Ö. Yağci, M. B. Arvas, and S. Yazar, “Facile and single step produced Ba:Sn-codoped PEDOT:PSS thin film electrode with improved optics and electrochemical properties for transparent and flexible supercapacitor applications,” New J. Chem., vol. 46, no. 46, pp. 22130–22142, Nov. 2022, doi: 10.1039/D2NJ04194D.

S. H. Choi et al., “Diamond-like carbon as a buffer layer in polymeric electroluminescent device,” Thin Solid Films, vol. 483, no. 1–2, pp. 351–357, Jul. 2005, doi: 10.1016/J.TSF.2004.12.040.

S. Rafique, S. M. Abdullah, M. M. Shahid, M. O. Ansari, and K. Sulaiman, “Significantly improved photovoltaic performance in polymer bulk heterojunction solar cells with graphene oxide /PEDOT:PSS double decked hole transport layer,” Sci. Reports 2017 71, vol. 7, no. 1, pp. 39555-, Jan. 2017, doi: 10.1038/srep39555.

S. Shin, S. Cha, and G. Cho, “Fabrication of Electroconductive Textiles Based PLA Nanofiber Web Coatedwith PEDOT:4PSS,” Fash. Text. Res. J., vol. 22, no. 2, pp. 233–239, Apr. 2020, doi: 10.5805/SFTI.2020.22.2.233.

C. Yin et al., “A Novel and Facile One-Pot Solvothermal Synthesis of PEDOT-PSS/Ni-Mn-Co-O Hybrid as an Advanced Supercapacitor Electrode Material,” ACS Appl. Mater. Interfaces, vol. 8, no. 4, pp. 2741–2752, Feb. 2016, doi: 10.1021/ACSAMI.5B11022.

D. P. Mali, R. T. Patil, A. S. Patil, and V. J. Fulari, “Facile synthesis of NiO nanoflakes via hydrothermal route: Effect of urea concentration,” Chem. Phys. Lett., vol. 770, p. 138431, May 2021, doi: 10.1016/J.CPLETT.2021.138431.

M. Imran, R. Ahmad, N. Afzal, and M. Rafique, “Copper ion implantation effects in ZnO film deposited on flexible polymer by DC magnetron sputtering,” Vacuum, vol. 165, pp. 72–80, Jul. 2019, doi: 10.1016/J.VACUUM.2019.04.010.

H. Xia, Y. Xiahou, P. Zhang, W. Ding, and D. Wang, “Revitalizing the Frens Method To Synthesize Uniform,Quasi-Spherical Gold Nanoparticles with Deliberately Regulated Sizesfrom 2 to 330 nm,” Langmuir, vol. 32, no. 23, pp. 5870–5880, Jun. 2016, doi: 10.1021/ACS.LANGMUIR.6B01312.

A. M. M. Hasan and M. A. B. H. Susan, “PEDOT:PSS polymer functionalized carbon nanotubes integrated with graphene oxide and titanium dioxide counter electrode for dye-sensitized solar cells,” Heliyon, vol. 11, no. 3, p. e42272, Feb. 2025, doi: 10.1016/J.HELIYON.2025.E42272.

H. T. Rahal, R. Awad, A. M. Abdel-Gaber, and D. E. S. Bakeer, “Synthesis, Characterization, and Magnetic Properties of Pure and EDTA-Capped NiO Nanosized Particles,” J. Nanomater., vol. 2017, 2017, doi: 10.1155/2017/7460323.

P. Dubey, Netram Kaurav, Rupesh S. Devan, G. S. Okram, and Y. K. Kuo, “The effect of stoichiometry on the structural, thermal and electronic properties of thermally decomposed nickel oxide,” RSC Adv., vol. 8, pp. 5882–5890, 2018, [Online]. Available: https://pdfs.semanticscholar.org/f4ee/c02aed37173c3c53fd0426e590086fbb585d.pdf

P. Sakunpongpitiporn, K. Phasuksom, N. Paradee, and A. Sirivat, “Facile synthesis of highly conductive PEDOT:PSS via surfactant templates,” RSC Adv., vol. 9, no. 11, pp. 6363–6378, Feb. 2019, doi: 10.1039/C8RA08801B.

C. Yeon, G. Kim, J. W. Lim, and S. J. Yun, “Highly conductive PEDOT:PSS treated by sodium dodecyl sulfate for stretchable fabric heaters,” RSC Adv., vol. 7, no. 10, pp. 5888–5897, Jan. 2017, doi: 10.1039/C6RA24749K.

H. Machrafi, F. Iermano, S. Temsamani, I. Bobinac, and C. S. Iorio, “Enhanced electrical conductivity and stretchability of ionic-liquid PEDOT:PSS air-cathodes for aluminium-air batteries with long lifetime and high specific energy,” Sci. Reports 2022 121, vol. 12, no. 1, pp. 22107-, Dec. 2022, doi: 10.1038/s41598-022-26546-8.

B. H. Shetty et al., “Fabrication of High-Performance MgCoO2/PEDOT:PSS@Nickel Foam Anode for Bioelectricity Generation by Microbial Fuel Cells,” J. Nanomater., vol. 2022, no. 1, p. 6358852, Jan. 2022, doi: 10.1155/2022/6358852.

X. Xu, J. Gao, and W. Hong, “Ni-based chromite spinel for high-performance supercapacitors,” RSC Adv., vol. 6, no. 35, pp. 29646–29653, 2016, doi: 10.1039/C5RA27931C.

F. I. Dar, K. R. Moonooswamy, and M. Es-Souni, “Morphology and property control of NiO nanostructures for supercapacitor applications,” Nanoscale Res. Lett. 2013 81, vol. 8, no. 1, pp. 363-, Aug. 2013, doi: 10.1186/1556-276X-8-363.

D. Jiang et al., “NiO/NixCo3−xO4 porous ultrathin nanosheet/nanowire composite structures as high-performance supercapacitor electrodes,” RSC Adv., vol. 8, no. 56, p. 31853, 2018, doi: 10.1039/C8RA04827D.

G. Greco et al., “Pedot:PSS/Graphene Oxide (GO) Ternary Nanocomposites for Electrochemical Applications,” Molecules, vol. 28, no. 7, p. 2963, Apr. 2023, doi: 10.3390/MOLECULES28072963/S1.

G. Greco et al., “Eco-Friendly EOG/PEDOT:PSS-Based Nanocomposites Blendedwith Green Additives for Flexible Supercapacitor Application,” ACS Appl. Eng. Mater., vol. 4, no. 2, pp. 1163–1176, Feb. 2026, doi: 10.1021/ACSAENM.5C01224.

B. Tzaneva, M. Aleksandrova, V. Mateev, B. Stefanov, and I. Iliev, “Electrochemical Properties of PEDOT:PSS/Graphene Conductive Layers in Artificial Sweat,” Sensors 2024, Vol. 24, Page 39, vol. 24, no. 1, p. 39, Dec. 2023, doi: 10.3390/S24010039.

Y. Ge, X. Xie, J. Roscher, R. Holze, and Q. Qu, “How to measure and report the capacity of electrochemical double layers, supercapacitors, and their electrode materials,” J. Solid State Electrochem. 2020 2411, vol. 24, no. 11, pp. 3215–3230, Aug. 2020, doi: 10.1007/S10008-020-04804-X.

J. Liu et al., “Advanced Energy Storage Devices: Basic Principles, Analytical Methods, and Rational Materials Design,” Adv. Sci., vol. 5, no. 1, p. 1700322, Jan. 2018, doi: 10.1002/ADVS.201700322;WGROUP:STRING:PUBLICATION.

C. Yin et al., “A Novel and Facile One-Pot Solvothermal Synthesis of PEDOT-PSS/Ni-Mn-Co-O Hybrid as an Advanced Supercapacitor Electrode Material,” ACS Appl. Mater. Interfaces, vol. 8, no. 4, pp. 2741–2752, Feb. 2016, doi: 10.1021/ACSAMI.5B11022.

Y. M. Volfkovich, “Electrochemical Supercapacitors (a Review),” Russ. J. Electrochem. 2021 574, vol. 57, no. 4, pp. 311–347, May 2021, doi: 10.1134/S1023193521040108.

J. Wang, J. Polleux, J. Lim, and B. Dunn, “Pseudocapacitive contributions to electrochemical energy storage in TiO 2 (anatase) nanoparticles,” J. Phys. Chem. C, vol. 111, no. 40, pp. 14925–14931, Oct. 2007, doi: 10.1021/JP074464W.

K. D. Fong, T. Wang, H. K. Kim, R. V. Kumar, and S. K. Smoukov, “Semi-Interpenetrating Polymer Networks for EnhancedSupercapacitor Electrodes,” ACS Energy Lett., vol. 2, no. 9, pp. 2014–2020, Sep. 2017, doi: 10.1021/ACSENERGYLETT.7B00466.

B. Pal, S. Yang, S. Ramesh, V. Thangadurai, and R. Jose, “Electrolyte selection for supercapacitive devices: a critical review,” Nanoscale Adv., vol. 1, no. 10, pp. 3807–3835, Oct. 2019, doi: 10.1039/C9NA00374F.

T. Kress, X. Liu, and A. C. Forse, “Pore network tortuosity controls fast charging in supercapacitors,” Nat. Mater. 2025 253, vol. 25, no. 3, pp. 440–446, Nov. 2025, doi: 10.1038/s41563-025-02404-6.

A. Lasia, “Electrochemical impedance spectroscopy and its applications,” Electrochem. Impedance Spectrosc. its Appl., vol. 9781461489337, pp. 1–367, Aug. 2014, doi: 10.1007/978-1-4614-8933-7/SAVE-RESEARCH.

M. E. Orazem and B. Tribollet, “Electrochemical Impedance Spectroscopy,” Apr. 2017, doi: 10.1002/9781119363682.

H. Shi, C. Liu, Q. Jiang, and J. Xu, “Effective Approaches to Improve the Electrical Conductivity of PEDOT:PSS: A Review,” Adv. Electron. Mater., vol. 1, no. 4, Apr. 2015, doi: 10.1002/AELM.201500017.

Q. Yang, S. K. Pang, and K. C. Yung, “Study of PEDOT–PSS in carbon nanotube/conducting polymer composites as supercapacitor electrodes in aqueous solution,” J. Electroanal. Chem., vol. 728, pp. 140–147, Aug. 2014, doi: 10.1016/J.JELECHEM.2014.06.033.

Z. Li et al., “Structural evolution of a Ni/NiOx based supercapacitor in cyclic charging-discharging: A polarized neutron and X-ray reflectometry study,” Electrochim. Acta, vol. 290, pp. 118–127, Nov. 2018, doi: 10.1016/J.ELECTACTA.2018.09.051.

Y. Li et al., “A strong and highly flexible aramid nanofibers/PEDOT:PSS film for all-solid-state supercapacitors with superior cycling stability,” J. Mater. Chem. A, vol. 4, no. 44, pp. 17324–17332, Nov. 2016, doi: 10.1039/C6TA06981A.

X. hui Xia, J. ping Tu, X. li Wang, C. dong Gu, and X. bing Zhao, “Hierarchically porous NiO film grown by chemical bath deposition via a colloidal crystal template as an electrochemical pseudocapacitor material,” J. Mater. Chem., vol. 21, no. 3, pp. 671–679, 2011, doi: 10.1039/C0JM02784G.

X. Yan, X. Tong, J. Wang, C. Gong, M. Zhang, and L. Liang, “Rational synthesis of hierarchically porous NiO hollow spheres and their supercapacitor application,” Mater. Lett., vol. 95, pp. 1–4, Mar. 2013, doi: 10.1016/J.MATLET.2012.12.073.

B. Ren, M. Fan, Q. Liu, J. Wang, D. Song, and X. Bai, “Hollow NiO nanofibers modified by citric acid and the performances as supercapacitor electrode,” Electrochim. Acta, vol. 92, pp. 197–204, Mar. 2013, doi: 10.1016/J.ELECTACTA.2013.01.009.

J. Xu, L. Gao, J. Cao, W. Wang, and Z. Chen, “Electrochemical capacitance of nickel oxide nanotubes synthesized in anodic aluminum oxide templates,” J. Solid State Electrochem. 2010 159, vol. 15, no. 9, pp. 2005–2011, Oct. 2010, doi: 10.1007/S10008-010-1222-6.

Z. Zhou, H. Ni, and L. Z. Fan, “Hydrothermal synthesis of graphene/nickel oxide nanocomposites used as the electrode for supercapacitors,” J. Nanosci. Nanotechnol., vol. 14, no. 7, pp. 4976–4981, 2014, doi: 10.1166/JNN.2014.8685.

C. N. Chen, T. Ma, Q. Zhang, W. Fan, X. W. Fu, and Z. B. Wang, “Synthesis and Electrochemical Properties of Nitrogen-Doped Graphene (NG)/Nickle Oxide (NiO) Nanocomposite for Supercapacitor,” J. Nanosci. Nanotechnol., vol. 15, no. 12, pp. 9699–9704, Dec. 2015, doi: 10.1166/JNN.2015.11629.

M. G. Fayed, D. Aman, and S. G. Mohamed, “Synergetic Electrochemical Behavior of NiO and Activated Carbon Composites for Advanced Supercapacitors,” J. Clust. Sci. 2025 363, vol. 36, no. 3, pp. 94-, Apr. 2025, doi: 10.1007/S10876-025-02804-3.

B. Wang et al., “Mango Kernel-Derived Porous Carbon Confines Nano-NiO as an Efficient Bifunctional Electrode for Supercapacitors,” Bioresour. , vol. 20, no. 4, pp. 11056–11065, 2025, doi: 10.15376/BIORES.20.4.11056-11065.

Downloads

Published

2026-11-13

How to Cite

Hassan, S. S., Imran , M., Alluhaybi, A., Bashir , M. I., Akhtar, M. J., & Rohaan , M. A. (2026). Engineering NiO/PEDOT: PSS Hybrid Electrode for Enhanced Charge-Storage Kinetics, Energy Density, and Long-Term Cycling Stability. International Journal of Innovations in Science & Technology, 8(10), 4122–4144. Retrieved from https://journal.50sea.com/index.php/IJIST/article/view/2141

Issue

Section

Articles